Professional Grade Digital Clamp Meters

Service Details:

To serve escalating requirement of our clients, we are committed towards offering a wide range of 2000 A AC DC Digital Clamp Meter. Our skilled professionals manufacture this meter by using well-tested raw material and sophisticated technology. In addition to this, our offered range is rigorously tested by our quality controllers against diverse parameters in order to deliver a defect-free range at clients' end. Moreover, the offered range is extensively appreciated by our clients for featuring variegated attributes like precise design and sturdiness.

 

Features:

 

• Auto Ranging

• Full Automatic measurement

• Range change function

• Data Hold function freezes the reading

• Continuity & Diode Measurements

• Auto Power Off

• Low Battery Indication

Additional Information:

• Item Code: KUSAM-MECO-2775
• Packaging Details: Test leads, Carrying Case, Battery installed, User's Manual.

Service Details:

As per the variegated requirements of our clients, we are offering a broad collection of DC/ AC Clamp Meter. This meter is manufactured using excellent quality raw material and latest technology by our skilled professionals. In order to ensure quality, this meter is stringently tested on different parameters by our experts. Apart from this, remarkable quality and sturdy structure increase the demand of our offered meter in the market.

Features:

• High Accuracy, Digital Reading

• ACA/DCA measurement upto 999.9A

• Indoor use

• Overload Protection on all ranges

• Diode & Continuity Test

• Auto Power Off

• Low Battery Indication

• Instant Continuity Buzzer

• Data Hold, Peak Hold & Max Hold Fu

• Relative Zero Mode function.

Additional Information:

• Item Code: KUSAM-MECO-9999

Service Details:

ModelKM-071

We supply only flawless range of Process Clamp Meters that are available with a magnetic modulated technology, which allows the instrument to reach excellent sensitivity with great anti earth magnetically field ability. Furthermore, we ensure that these clamp meters are supplied at cost-effective prices to suit the budgetary constraints of our clients.

Features:-
The KM 071 Milliamp Process Clamp Meter is a Hand-held battery operated clamp meter that measures 4-20 mA DC without breaking the electrical circuit. Unlike conventional clamp meters, this meter features a small jaw that easy to reach any place there is a cable carrying with a current. This meter takes a magnetic modulated technology, it can reach excellent sensitivity with great anti earth magnetical field ability.

Kindly refer to the PDF for more information

 

 

Additional Information:

• Item Code: KUSAM-MECO-071

Service Details:

Model CA-1000 / 2000

FEATURES :

• Basic Accuracy : 1.5%rdg + 2A
• CA1000/CA2000 Current Clamp is a transducer which will allow your multimeter to measure electrical Current upto 500/1000/2000 amperes AC or DC, with a Frequency response upto 400Hz.
• The clamp is built with a design of finger guard which ensures user operating the clamp under a safety situation, with a rugged case that is shock resistant and fire-retardant.
• When measuring current with this clamp, there is no need to break a circuit or to affect the isolation.
• It can be used for waveform analysis by connecting it to an oscilloscope.
• Auto Zero function

kindly refer to the PDF for more information

Additional Information:

• Item Code: KUSAM-MECO-CA-1000-2000

Service Details:

We Offer Leakage Current Clampmeter With Data Logging Function & PC Interface
Model - KM 2008

GENERAL SPECIFICATIONS :

•  Sensing :  Average sensing
•  Jaw Opening Size : 40mm
•  Function :  Measurement of AC leakage current, AC Current upto 300A & On-line measurement.
•  Display Size : 32mm x 15mm
•  Test Mode : Clip-on CT, Integral mode.
•  Display Mode : Four Digit LCD display.
•  LCD Dimension : 35mm x 21.5mm
•  Sampling Rate :  About 2times/s
•  Range : 0.00mA ~300.0A (50/60Hz)
•  Resolution : 10mA
•  Line voltage : Line test under AC600V
•  Data Hold : Display shows “DH” symbol.
•  Out of Range :  Display shows  “OL” symbol.
•  Data Storage : 99 groups, all used when display “FULL”
•  Power Consumption : about 5mW

kindly refer to the PDF for more information

 

Additional Information:

• Item Code: KUSAM-MECO-2008
• Packaging Details: Carrying Case, Battery installed, User's Manual, RS232 PC Interface CD.

Service Details:

Model - KM 2008A

Technical Specification

• Function : Measurement of AC leakage current, AC Current upto 300A
• Test Mode : Clip-on CT, Integral mode.
• Display Mode : Four Digit LCD display.
• LCD Dimension : 35mm x 21.5mm
• Display Size : 32mm x 15mm
• Jaw Size : 40mm
• Sampling Rate :  About 2times/s
• Range : 0.00mA ~300.0A (50/60Hz)
• Resolution :  0.01mA
• Measuring range :  30mA/300mA, 30A/300A
• Line voltage : Line test under AC600V
• Data Storage : 60 groups, “FU”symbol flickering means storage is full

kindly refer to the PDF for more information

Additional Information:

• Item Code: KUSAM-MECO-2008A

Service Details:

Model 2718

We are the leading supplier and manufacturer of 3½ Digits 2000 Count Digital Clamp Meter


Features:

• 3½ Digits 2000 Counts
• Conductor size is 26 mm.
• 31/2 Digits LCD (1999 counts)
• Auto Polarity Display
• Measurement speed is 3 times/second
• Data Hold, Max Hold facility
• IEC 61010 CAT II 600V, CAT III 300V over voltage and double insulation standard approved
• Low Battery Indication

Additional Information:

• Item Code: KUSAM-MECO-2718
• Packaging Details: Test leads, Carrying Case, Battery installed, User's Manual, Drop proof wrist strap & Temperature Probe

Service Details:

We put forward a broad range of Leakage AC Clamp on Meter that is manufactured in adherence with the set industry standards using advanced technology and optimum quality raw material. In tune with industry quality standard, we provide this meter in various sizes and specifications, as per the requirement of our clients. Our quality controllers perform a series of test on various parameters, in order to ensure the quality of this meter.

 

Features:

 

• LPF (Low Pass Filter) function

• In Continuity Test, reading below 100W approx. will be indicated by buzzer

• Display annunciators for Units & Functions

• MAX Hold Function

• Wide frequency range selection with Low Pass Harmonics filter for accurate measurements.

 

Additional Information:

• Item Code: KUSAM-MECO-2007

Service Details:

With the help of our skilled professionals, we are capable in offering a wide array of Auto ranging Digital Clamp Meter. The offered meter is meticulously tested on various quality parameters and is widely demanded in various industries. Provided meter is manufactured by utilizing optimum quality raw material and latest technology by our experts. In line with industry standard, we provide the entire range in various customized options and at affordable price.

 

Features:

 

• High Resolution DCA / ACA of 1mA            

• Auto Polarity display

• Auto Zero Adjustment                                  

• Display annunciators for all functions &  ranges

• Continuity & Diode Measurements              

• Auto Power Off

• Low Battery Indication

 

Additional Information:

• Item Code: KUSAM-MECO-2720-2725

Service Details:

Model CA 300

Special Features :

• This Clamp Adaptor has Basic Accuracy : 1.5%rdg + 5dgts
• This Clamp Adaptor has Average Sensing
• This Clamp Adaptor has CA 300 Current Clamp Head is AC current transformer with the function to transform AC Current into ACV. Plug it into any Digital Multimeter with banana-shape input socket (VAC-2V or 20V position) to replace Digital Clamp Meters to measure AC current.

kindly refer to the PDF for more information

Additional Information:

• Item Code: KUSAM-MECO-CA-300

Service Details:

Model KM 2009

We Offer AC DC Digital Clampmeter for Solar Applications.

General Specifications:-

• Sensing : Average sensing
• Jaw Opening Size : 40mm
• Function :Measurement of AC / DC current, upto 600A & On-line measurement.
• Display Size : 32mm x 15mm
• Test Mode : Clip-on CT, Integral mode.
• Display Mode : Four Digit LCD display.
• LCD Dimension : 35mm x 21.5mm
• Sampling Rate : About 2times/s
• AC/DC Current Range : 0.0A ~600A
• Frequency Range : 45Hz ~ 400Hz
• Resolution : 0.1A
• Accuracy : ±2%rdg + 3dgts
• Line voltage : Line test under AC600V
• Data Hold : Display shows “DH” symbol.
• Out of Range : Display shows “OL” symbol.
• Data Storage : 99 groups, all used when display “FULL”
• Power Consumption : about 10mW
• Peak Hold : Press “HOLD” without release, the meter will show the peak value.
• Battery Voltage : “ - + ” indicating the battery voltage is lower then 7.2V. Then the battery have to be changed.
• Operating Temperature and Humidity : 0 degree C ~ 40 degree C : below 80% R.H.
• Storage Temperature and Humidity : -10 degree C ~ 60 degree C : below 70%rh
• Insulation Strength : AC 2kV/rms (between the alloy of the clamp & housing)
• Auto Power Off : 5 minutes after power on, it will power off automatically to lower the power consumption.
• Power : Standard 9V battery.
• Dimension : 175(W) x 70(H) x 38(T)mm
• Weight : Approx. 180g (with battery)

kindly refer to the PDF for more information

Additional Information:

• Item Code: KUSAM-MECO-2009

Service Details:

Model 405MK-1 ( 17 functions 33 ranges )

Features

 
• Auto Polarity Display.
• Overrange Indication.
• Low Battery Indication.
• Data Hold Function.
• Auto power off
• Shock Resistant & Fire Retardant Casing.
• Input warning beeper
• Logic test, Diode Test & Continuity Test
• Duty Cycle Function.
• CE approved

General Specification

 
• Sensing : True RMS Sensing.
• Basic Accuracy : ± (0.05%rdg + 3 dgts)
• Display : 4 ½ digits, 19999 counts large LCD display with function and unit sign annunciators.
• Display Size : 17 mm
• Over range indication:"1" most significant digit blinks.
• Low battery indication : The is displayed when the battery voltage drops below the operating level.
• Polarity : Automatic, (-) negative polarity indication.
• Auto power off : Meter automatically shuts down after approx.45 minutes of inactivity.
• Altitude : 6561.7 (2000M)
• Measurement rate : 2.5 times per second, nominal
• Operating Temperature : 0°C to 50°C at < 70% R.H.
• Storage Temperature : -20°C to 60°C, 0 to 80 % R.H with battery removed from meter.
• Temperature Coefficient : 0.1 x (specified accuracy) / °C (0°C ~ 18° or 28°C ~ 50°C)
• Power : Single 9V Alkaline battery.
• Battery life : 500 hours typical with alkaline.
• Dimension : 198(H) x 90(W) x 44(D)mm.
• Weight : Approx. 400g including battery.

Additional Information:

• Item Code: 405MK-1

Service Details:

Special Features

• True RMS Measurement
• Auto Scan Mode
• LCD Backlight Display
• Non-Contact EF-Detection.
• Auto power Off
• Manual Ranging & Auto Ranging mode
• Data Hold Function
• Max / Min mode.
• Frequency Measurement.
• CE Approved.

General Specifications

• Display : 3/5-6 digits 6000 Counts LCD display
• Pollution degree : 2
• Altitude : <2000m
• Operating Temperature : 0 - 40 ° C, 32 ° F - 122 ° F "80%RH, <10 °C non-condensing)
• Storage Temperature: -10 - 60 °C, 14 °F - 140 °F "70%RH, battery removed)
• Temperature coefficient : 0.1x (specified accuracy) /°C (<18 °C or >28 °C)
• Max. Voltage between terminals & earthground : 1000VAC rms or 1000VDC.
• Fuse protection :
A & mA F 0.63A/1000 Ø V 010.3 x 38;
            F 10A/1000V Ø 10.3 x 38.
• Sampling rate : 3 times / see for digital data.
• Range Selection : Automatic & manual.
• Over range indication : LCD will display "OL"
• Low battery indication : The " " is displayed when the battery is less than the proper operation range.
• Power Supply : 9V battery.
• Dimension : 190(L) X 90(W) X 40(H) mm
• Weight : Approx. 500g. (including battery).

Additional Information:

• Item Code: KM-DMM-41

Service Details:

Features :
• DMM-90 has a unique feature wherein the LCD
display shows the terminals where the test leads
are to be inserted to avoid wrong connection &
damage to the meter.
• Low Power Consumption CMOS double integration
A / D transform integrated circuit
• Auto Zero Calibration
• Auto Polarity display
• Selected Range displayed on LCD
• Instant Continuity Buzzer.
• “DATA - HOLD” switch freezes reading.
Low Battery & Over range indication.

General Specifications :
 
• Sensing : Average Sensing.
• Display: 4½ digit ( LCD. With display height 53mm and digit height 20mm and function / units sign annunciators.
• Over range indication: Highest digit of (1) or (-1) is displayed.
• Low battery: The “ ”sign is displayed when the battery voltage drops below the operating Voltage.
• Polarity: Automatic (-) negative polarity indication,
• Measurement rate: 2.5 measurements per second,
• Operating Temperature : 0°C to 50°C,<70% R.H
• Storage Temperature : -20°C to 60°C,<80% R.H. (With battery removed).
• Accuracy : Accuracy specifications at 23 ± 5°C;<75% RH.
• Auto Power Off : The meter will shut off automatically about 15 minutes after power is ON if the meter is not in use.
• Power: Single 9 V Battery.
• Dimension : 179(L) x 88(W) x 39(H)mm.
• Weight : Approx. 380 gms. (including battery)

Additional Information:

• Item Code: DMM-90

Service Details:

Features

• Test lead jack mechanical protection function
& full Range over-load protection function
• Low power consumption CMOS double
integration, A/D transform integrated circuit
• Back light display
• Auto Zero Calibration
• Auto Polarity display
• Low Battery & Over range indication.
• Selected range displayed on LCD.
• Instant continuity Buzzer.
• Recessed safety designed Input jacks
• " DATA HOLD" switch freezes reading

Features

• Sensing : Average Sensing.
• Display : 3½ digit 1999 counts LCD display with automatic sign and Function annunciators.
• Digit height : 28mm
• Over range indication : Highest digit of (1) or (-1) is displayed.
• Polarity : Automatic (-)negative polarity indication.
• Low battery : The " " sign is displayed when the battery Voltage drops below the operating Voltage.
• Measurement rate : 2.5 measurements per second , nominal.
• Operating Temperature : 0°C to 40°C; (32°F to 104°F).
• Storage Temperature : -10°C to 50°C; (14°F to 122°F).
• Auto Power Off : The meter will shut off automatically about 15 Minutes after power is ON if the meter is not in use.
• Power : Single 9 V Battery.
• Dimension : 192 (L) x 88 (W) x 42 (H) mm
• Weight : Approx. 600gms. (including battery)

Additional Information:

• Item Code: KM-6030

Service Details:

Features

• Test lead jack mechanical protection function &
full Range over-load protection function.
• Low power consumption CMOS double integration,
A/D transform integrated circuit
• Auto Zero Calibration
• Auto Polarity display
• Low Battery & Over Range indication
• Selected Range displayed on LCD
• Instant Continuity Buzzer
• Overload Protection in all Ranges
• Recessed Safety designed input jacks
• “DATA - HOLD “ switch freezes reading

General Specifications

• Sensing : Average Sensing.
• Display : 3¾ digit, 3999 counts with automatic sign annunciators 28mm
• Overrange indication : Highest digit of (1) or (-1) is displayed .
• Polarity : Automatic (-) negative polarity indication
• Auto Power off : The meter will shut off automatically about 15 minutes after power is ON if the meter is not in use.
• Low battery : The " " sign is displayed when the battery Voltage drops below the operating Voltage.
• Measurement rate : 2.5 measurements perí Second, nominal
• Operating Temperature: 0°C to 50°C, <70% R.H.
• Storage Temperature: -20°C to 60°C, <80% R.H. with battery removed
• Power : Single 9V Battery
• Dimension :192(L) x 88(W) x 42(H)mm
• Weight : Approx.600gms.(including battery)

Additional Information:

• Item Code: KM-6040

Service Details:

MODEL - KM 6050 (18 functions 29 ranges)

Features
• Low power consumption CMOS double integration,
A/D transform integrated circuit
• Auto zero Calibration,
• Auto polarity display,
• Data hold,
• Low battery and Over - range indication.
• Test lead jack mechanical protection function and
full range over - load protection function.
• Auto power off function

General Specifications
• Sensing : Average Sensing.
• Basic Accuracy : ± 0.05%
• Capacitance measurement : 0-200μ F
• Display : 4½ digit 19999 counts Large LCD display
• Display Size : 70 x 48mm
• Digit Size : 28mm
• Low battery indication : " " will occur on the left top of the LCD.
• Operation Temperature : 0 °C~ 50 °C; <85% R.H.
• Storage Temperature : -10 °C ~ 60%; <85% R.H.
• Power : Standard 9V battery.
• Dimension : 192(L) x 88(W) x 42(H)mm
• Weight : approx.400g (including battery and holster)

Additional Information:

• Item Code: KM-6050

Service Details:

This 50kΩ /V analog multitester with its wide range of measurement capabilities, which includes a 10A AC range, is particularly designed for the requirement of electrical and electronic specialists and engineers. This instrument is also provided with meter over load protection and shock proof device.
Features
• High quality Taut Band movement.
• Easy to read 3-color scale for mistake proof reading.
• Mirror scale makes reading pointer easy.
• Safety features on all ranges.
• Safety features safety fused, safety "OFF" position.
• dB measurement.
• With stand makes reading and measuring easy.
• EN 61010-1 CATIII 600V EN 61326-1

Specifications
• DC Voltage
Ranges : 0.25/1/2.5/10/50/250/1000V
Accuracy : ±2% F.S.
Sensitivity : 50kΩ /V

• AC Voltage
Ranges : 2.5/10/50/250/1000V
Accuracy : ±3% F.S.
Sensitivity: 10kΩ /V
Decibelmeter : -20 to 62dB 0dB=1mW/600Ω Direct Scale -20 to + 10dB

• DC Current
Ranges : 25mA-1mA-25 /500 10A(on separate input)
Accuracy : ±2% F.S.
Sensitivity 250mV

• AC Current
Ranges : 10A
Accuracy : ±3% F.S.

• Resistance
Ranges : Rx10.2 to 20kΩ, Rx102 to 200kΩ, Rx10020 to 2MΩ, Rx1K200 to 20MΩ
Accuracy : ±3% of F.S. length

• General
Power Source : 1.5V(AA) x 2
Dimension : 160(L) x 100(W) x 45(D)mm
Weight : 380g (battery included)

Additional Information:

• Item Code: KM-ST-505N

Service Details:

Features
• Low power consumption CMOS double integration A/D transform integrated circuit
• Auto zero Calibration
• Auto polarity display
• Data hold
• Low battery and Over - range indication.

• Full range over load protecton function.

General Specifications
• Sensing : Average Sensing.
• DC Basic Accuracy : ± 0.5%
• Display : 31/2 digit 1999 counts.
• LCD display : 70 x 48mm large LCD
• Digit height : 28mm
• Backlight display, suitable for use in the poor lit Environment
• Auto power off function : The meter will shut off automatcilly
about 15 seconds after no activity
• Operation Temperature : 0 ° C~ 50 ° C; <85% R.H.
• Storage Temperature : -10° C ~ 60 ° C; <70% R.H.
• Power : Standard 9V battery.
• Dimension : 192 x 88 x 42mm
• Weight : approx 400g (including battery)

Additional Information:

• Item Code: KM-6060

Service Details:

Model CA-500

The AC/DC Current Clamp Adapters are widely used to measure electrical current up to 500 amperes AC or DC, with a frequency response up to 400Hz. Besides, these instruments are developed using world-class quality raw material that we procure from industry reputed vendors. Our clients can also purchase the products with customized solutions as per their emerging demands.

Special Features:-

• This Clamp Adapter has Basic Accuracy : 2.0%rdg + 2dgts
• This Clamp Adapter has Average Sensing
• This Clamp Adapter has CA 500 Current Clamp is a Transducer which will allow your multimeter to measure electrical Current
• This Clamp Adapter has 500Amp AC or DC, with a Frequency response upto 400Hz
• This Clamp Adapter has When measuring Current with this Clamp, there is no need to break a circuit or to affect the isolation
• This Clamp Adapter has can be used for waveform analysis by connecting it to an Oscilloscope

kindly refer to the PDF for more information

Additional Information:

• Item Code: KUSAM-MECO-CA-500

Service Details:

Model CA 3000/ CA 3000D

Features:

• Measurement Ranges: 30A/300A13000AAC
• Output Sensitivity: 100mV/10mV/1mV per Amp (AC Coupled) (CA 3000)
• Output Resolution (LCD Display): 0.01A/0.1A/1A (CA 3000D)
• 18" flexible sensor fit around conductors up to 5.8"in diameter.
• TRMS Reading (CA 3000D)
• 8.5mm coil diameter allows measurement in tight spaces. (Double insulated)
• 1.8m (6 ft) cable.
• Flashing LED low battery indicator. (CA 3000)
• Dual banana plug termination for direct input into DMM. (CA 3000)
• EN 61010, CAT IV 600V, CAT III 1000V.

kindly refer to the PDF for more information

Additional Information:

• Item Code: KUSAM-MECO-CA3000-CA3000D