Service Details:
Model Name/Number | KM 520B |
Brand | Kusam Meco |
Test Frequency | Measurement frequency up to 100KHz |
Power Source | Battery and external power supply |
Display | Auto LCR smart check and measurement 19,999 / 1,999 counts dual LCD display |
Accuracy | 0.3% with resolution of 0.01% |
Features:
Auto LCR smart check and measurement 19, 999 / 1, 999 counts dual LCD display
Basic accuracy : 0.3% with resolution of 0.01%
Analog bar display
Measurement frequency up to 100KHz
Mini - USB interface (KM 520B only)
Sorting function
Relative measurement
Data hold
Back light, full angle for LCD display
4 - terminal measurement configuration
Automatic power off
Battery and external power supply
Battery voltage indication
Additional Information:
Service Details:
Model Number/Name | KM 8040 |
Measuring Range | 0.0% to 95.7 % |
Display Type | 3 digits |
Measuring Rate | Moisture 1s,Temperature 125 ms |
Resolution | 0.1 %,0.1 degree celsius,0.1 degree fahrenheit |
Brand | Kusam Meco |
Additional Information:
Service Details:
Model Number | KM 878 |
Brand | Kusam Meco |
Digit Display | 3 - 5/6 digit |
Usage/Application | AC,True RMS |
AC Voltage | 1mV - 1000V (DC/AC Voltage),100mV - 600V (VFD AC Voltage) |
Operating Temperature | -10 - 40 Degree Celsius |
DC Voltage Accuracy | 0.2% |
Battery | Four Alkaline AA batteries |
Resistance Range | 100m Ohm - 60M Ohm |
Size | 208(L) X 103(W) X 64.5(H) mm with holster |
Display Type | Dual digital LCD display with Backlight |
Temperature Range | -50 - 537 Degree Celsius |
Standard Accessories | Test probe pair,Alligator clip pair,Remote control probe,Holster,User manual |
Weight | 635 gm with holster |
Diode Test | Yes |
Continuity Check With Beeper | Yes |
Additional Information:
Service Details:
Model Name/Number | KM 8080 |
Accuracy | 1.5dB (under 94dB) |
Measuring Range | 30db ~ 120db |
Frequency Range | 31.5Hz ~ 8KHz |
Response Time | Analog bar : 0.25 S; Digital : 0.75 S |
Features:
3½ digits Display
Resolution 0.1 dB
MAX/MIN Hold Function
AC/DC Signal output (KM 927)
Time Weighting : Fast, Slow
USB Interface, 14000 Records Data logger (KM-929)
Low battery indication
Applicable standards : IEC 651 Type II, ANSI 1.4 Type II
Additional Information:
Service Details:
Earth Resistivity | 0ohm -30.000kohm |
Soil Resistivity | 0ohm - 9000kohm |
Line Voltage | below AC 600V |
Test Voltage Wave | Sine wave |
Additional Information:
Service Details:
Model Name/Number | KM 2820EL |
Voltage | 100-450V L-E |
Rated Current | 999mA,at 317V AC/50Hz |
kindly refer to the PDF for more information
Additional Information:
Service Details:
Minimum Order Quantity | 1 Unit |
Brand | Kusam Meco |
Model | Model - IR-L 380 / IR-L 550 / IR-L 900 / IR-L 1000 Infrared Thermometers |
Model - IR-L 380 / IR-L 550 / IR-L 900 / IR-L 1000 Infrared Thermometers
We supply a variant range of Infrared Thermometers, which is mainly used for safety oriented purposes like gas pipelines, automotive industry, clinical use and electrical panel. Furthermore, it is best suitable for places that do not allow normal temperature probe and also at dangerous places like heat treatment furnace, high voltage operating plants, molten metal temperature monitoring, kiln temperature, bearing temperature, energy conservation, scientific experiment, research & development, air conditioning, petrochemicals, automobile repair & maintenance.
MODEL - IR-L 300 / IR-L 550 / IR-L 900 / IR-L 1000 INFRARED THERMOMETERSAdditional Information:
Service Details:
Model Number/Name | KM 2803IN / KM 2804IN |
Brand | Kusam Meco |
Display | 2 Lines * 16 characters large LCD display |
Storage Temp Range | -10 to 65 Degree Celsius |
Storage Humidity | Less than or equal to 80% RH |
Operating Humudity | 80% max. R.H. |
Weight | 930g Approx. |
Dimensions | 170(L)x120(W)x95(D) mm. |
Battery Type | 1.5V (AA) x 8 Alkaline Batteries |
Operating Temperature | 0 ~ 40 Degree Celsius |
Relative Humidity | 80% max. R.H. |
Features:
Microprocessor controlled with advanced safety features
Displays and sound warning if external voltage is present
Battery life is extended by EnersaveTM feature
Continuous battery monitoring
Auto - Ranging / Auto Power - off
Built-in- carrying case, test leads in separate pouch
Real-time bargraph display on test voltage and voltage decay during discharge
Audible and visual message displayed if external voltage is present
Large LCD
Show test time duration (up to 99.9s) for easy Comparison
IEC 1010-1 CAT.III
Additional Information:
Service Details:
Model Number/Name | KM 99/ KM 100K /KM 200K |
Measuring Range | 0 - 100000 Lux |
Brand | Kusam Meco |
Resolution | 0.1/1/10 LUX |
Accuracy | 5 % |
Sampling Time | 0.4 second |
Display | 3 1/2 LCD |
Additional Information:
Service Details:
Brand | Kusam Meco+ |
Operating Temperature | 1 C to 55 C (not in full sun light) |
Display Type | 2 lines x 16 characters LCD |
Auto null threshold | 5 ohm |
buzzer threshold | 3 ohm |
fast test | 10 sec |
long test | 60 sec |
With PI and DAR test functions | 2 lines x 16 characters LCD |
Load battery test current | About 300mA |
Features:
Two very unique features are found on the Multifunction Model1152MF, MOV and Gas Arrester testing.
Today, most equipments and electrical installations are protected by MOVs and Gas arresters.
The 1152MF can test these devices to establish if the devices are still operating correctly or not.
Energy conservation is featured on all these new Advanced Products.
EnerSaveTM limits the test duration to about 10 Seconds to save energy.
This new generation of test equipments has no moving parts. All calibration is saved internally in a non volatile memory.
Calibration can be done at any calibration facility around the world, without the need for dedicated calibration equipment.
This makes these products easier to maintain and lower the cost of Calibration and ownership.
Their calibration interval can be extended without much problem.
They comply to all the latest regulations, including UK 16 Edition.
Meets IEC/EN 61010-1 CAT III 600V.
Digital EE Calibration (No Potentiometers)
Automatic Voltmeter AC/DC at Start / Reset.
Off Push button (press more than 5 sec on 1kV key)
MOV/protection devices test
Polarization Index (PI) on 250, 500 and 1000V
Battery test on 250, 500 and 1000V
Voltmeter on request by keypad : Automatic
Auto-Discharge on all Test and all ranges
Continuity Open Circuit Voltage of 5V DC
Buzzer ON/OFF by key : Always ON (225mA Typical)
Test Auto-Stop.
Nominal Voltage @ 1mA on all insulation Ranges.
Re-programmable Microprocessor for Easy Updates.
Insulation Ranges Insulation measurement from 2k (250V range) to 8G (1kV Range)
Can be calibrated in ALL calibration laboratories
Continuity from 0.01 (220mA) to 1999
AC Voltmeter from 1 Vac to 700 Vac
Smart Hold & stop on Voltmeter AC / DC.
EnerSaveTM
Keypad Operation
On-Reset / Restart Key
Auto-Off
Test ON-OFF
Dielectric Absorption Ratio (DAR) on 250, 500 and 1000V
Battery Test at switch ON / Reset
Safety Voltmeter before each Test
Continuity short Circuit current >220mA (225mA Typical)
Leads Auto-Null key
DC Voltmeter from ±1VDC to ± 950VDC
Accept 8 rechargeable Batteries or Alkaline or Normal
Gas Arrester Function
Additional Information:
Service Details:
Model Number/Name | KM 6213AIN |
Usage/Application | Insulation Resistance |
Brand | Kusam Meco |
Display | Large LCD Display with timer |
Storage Temp Range | -10 - 65 Degree Celsius |
Storage Humidity | Less than or equal to 85% RH |
Operating Humudity | 85% RH |
Protection | Diodes |
Weight | Approx. 3.6kg |
Dimensions | 330(L) x 160(W) x 255(H) mm |
Battery Type | C Type 8 x 1.5V alkaline |
Low Battery Indication | less than 8VDC |
Operating Temperature | 0 - 40 Degree Celsius |
Relative Humidity | 85% RH |
Temperature | -10 - 65 Degree Celsius |
Power Supply | C Type 8 x 1.5V alkaline |
Kindly refer to the PDF for more information.
Additional Information:
Service Details:
Model Number | KM 857 |
Brand | Kusam Meco |
Digit Display | 4-4/5 digits 50,000 counts, 5-4/5 digits 500,000 counts for DC voltage |
Usage/Application | AC, AC + DC True RMS; Frequency Bandwidth 20kHz (V) & 1kHz (A) |
AC Voltage | 10 micro V - 1000 V |
Operating Temperature | 0 - 45 degree celsius |
DC Voltage Accuracy | 0.03% |
Battery | Single Alkaline 9V battery |
Display Type | Backlight display |
Dimensions | 186(L) mm * 87(W) mm * 35.5(H) mm; 198(L) mm * 97(W) mm * 55(H) mm with Holster |
Resistance | 10 m Ohm - 50 M Ohm |
Temperature Range | -20 - 60 degree celsius |
Standard Accessories | Test Leads pair, Holster, Battery installed, User Manual |
Diode Test | Yes |
Data Hold | Yes |
Auto Power Off | Yes |
Model KM 857 (13 functions 42 ranges)
Special Features :
• 500,000 counts high resolution stable reading mode.
• 20kHz Bandwidth voltage function
• Record MAX, MIN, MAX-MIN readings.
• Crest (Instantaneous Peak Hold) MAX, MIN, MAX- MIN readings.
• Relative zero mode.
• dBm readings.
• % 4 -20mA loop current readings.
• High noise rejection filtered Line Level Frequency mode.
• Line Level Frequency with 4 Trigger Levels.
• HBC Fuse Protection
Features :
• DC Voltage Basic Accuracy 0.03%
• Fully Autoranging
• Backlighted display.
• Fast Data Measurement 5/sec
• Data Hold function
• Diode Test & Duty Cycle
• Audible & Visible input warning.
• Auto Power Off
Additional Information:
Service Details:
Brand | Kusam Meco |
Model | MODEL - TSCT (Average Sensing) MODEL - TFCT (TRUE RMS) |
Output | DC 4-20 2 wire / 4wire ; DC 5-40V 2 wire |
Accuracy | +- 0.5% R.O. |
Transient Protection | 6Kv Response Time : 250ms |
kindly refer to the PDF for more information
Service Details:
Model Number/Name | 600-NH |
Parameter To Be Monitored | Temperature |
Export Of Data | Excel |
Dimensions | 113 x 74 x 32 (mm) |
Brand | Kusam Meco |
Power | ER 14250 Lithium battery,3.6 V (1000 days at standby state 3 yrs continous on) |
Additional Information: