High Safety Ul Approved Digital Multimeters

Service Details:

MODEL KM 887 ( 25 functions 51 ranges)

Special Features :

• VFD V & Hz readings
• LCD Backlight Display
• Record MAX/MIN regular readings.
• Display Hold Function.
• Dual Display +Hz readings.
• Relative zero mode.
• LOCK-Test mode for Insulation Resistance
• BeepJack™ audible & visible input warning.
• High resolution 60.00mV & 60.00 ranges.

Additional Information:

• Item Code: KM-887

Service Details:

Model KM 877 (23 functions 73 ranges)


Special Features :
• VFD V & Hz readings.
• Paper White Backlight LCD Display
• Record MAX / MIN readings.
• Display Hold Function.
• Dual Digital Display.
• PI & DAR Function.
• Autoranging.
• Pass /Fail Insulation Resistance Compare function; 12 selectable Preset Values.
• LOCK-Test mode for Insulation Resistance & Earth Continuity Test.
• BeepJack ™ audible & visible input warning.
• Remote Probe for insulation Resistance & Earth Continuity Test.
• Functions : DC/AC Voltage , VFD AC Voltage, Insulation Resisitance, Resistance, Earth Continuity Test, Hz Line Level Frequency Specifications :
• Sensing : AC, True RMS
• Display : 3-5/6 digits 6000 Counts Backlight LCD Display.
• 61 Segments Analog Bar Graph : 60 per second max.
• Auto or Manual-ranging mode.
• Auto Power Off.
• Polarity : Automatic
• Update Rate : 5 per second nominal
• Earth Continuity Test : 110mA @20 Ω range, 220mA @2.0 Ω range.
Tester can perform at least 3000 Earth Continuity Test measurements with new alkaline batteries at room temperature. These are standard test of 1 Ω with a duty cycle of 5 seconds on & 25 seconds off.


• Insulation Resistance @ 1mA Test Current :
  50V output Voltage :25mA, 100V output Voltage : 45mA
  250V output Voltage : 85mA, 500V output Voltage : 170mA
  1000V output Voltage : 440mA
  Tester can perform at least 950 Insulation Tests with new alkaline batteries at room temperature.
  These are standard tests of 1000V into 1MΩ with a duty cycle of 5 seconds on and 25 seconds off.
• Operating Temperature : -10°C ~ 40°C
• Relative Humidity : Maximum relative humidity 90% for temperature up to 28°C decreasing linearly to 50% relative humidity at 40°C.
• Pollution degree : 2
• IP Rating : IP40
• Storage Temperature : -20°C ~ 60°C, < 80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : Nominal 0.15 x (specified accuracy)/ °C @(-10°C~18°C or 28°C~40°C), or otherwise specified.
• Low Battery : approx. 4.6V
• Power Supply : Four Alkaline AA batteries
• Power Consumption : 4.5mA typical except : ACV +Hz & VFD ACV +Hz : 7.0mA
• APO Timing : Idle for 20 minutes
• APO Consumption : 50 µA typical
• Dimension: 208(L) X 103(W) X 64.5(H) mm with holster
• Weight : 635 gm with holster.

Additional Information:

• Item Code: KM-877

Service Details:

Features :

VFD V & Hz readings

Paper White Backlight LCD Display

Record MAX / MIN readings

Display Hold Function

Dual Digital Display

Autoranging

LOCK-Test mode for Insulation Resistance & Earth Continuity Test

BeepJack TM audible & visible input warning

Remote Probe for insulation Resistance & Earth Continuity Test

Functions : DC/AC Voltage , VFD AC Voltage, AC / DC mV, AC / DC mA, Insulation Resisitance, Resistance, Capacitance, Earth Continuity Test, Hz Line Level Frequency, Temperature,

General Specifications :
• Sensing : AC, True RMS
• Display : 3-5/6 digits 6000 Counts Backlight LCD Display.
• 61 Segments Analog Bar Graph : 60 per second max.
• Auto or Manual-ranging mode.
• Auto Power Off.
• Polarity : Automatic
• Update Rate : 5 per second nominal
• Earth Continuity Test : 110mA @20 Ω range, 220mA @2.0 Ω range.
Tester can perform at least 3000 Earth Continuity Test measurements with new alkaline batteries at room temperature. These are standard test of 1 Ω with a duty cycle of 5 seconds on & 25 seconds off.
• Insulation Resistance @ 1mA Test Current :
50V output Voltage :25mA, 100V output Voltage : 45mA
250V output Voltage : 85mA, 500V output Voltage : 170mA
1000V output Voltage : 440mA
Tester can perform at least 950 Insulation Tests with new alkaline batteries at room temperature.
These are standard tests of 1000V into 1MΩ with a duty cycle of 5 seconds on and 25 seconds off.
• Operating Temperature : -10°C ~ 40°C
• Relative Humidity : Maximum relative humidity 90% for temperature up to 28°C decreasing linearly to 50% relative humidity at 40°C.
• Pollution degree : 2
• IP Rating : IP40
• Storage Temperature : -20°C ~ 60°C, < 80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : Nominal 0.15 x (specified accuracy)/ °C @(-10°C~18°C or 28°C~40°C), or otherwise specified.
• Low Battery : approx. 4.6V
• Power Supply : Four Alkaline AA batteries
• Power Consumption : 4.5mA typical except : ACV +Hz & VFD ACV +Hz : 7.0mA
• APO Timing : Idle for 20 minutes
• APO Consumption : 50 µA typical
• Dimension: 208(L) X 103(W) X 64.5(H) mm with holster
• Weight : 635 gm with holster.

Additional Information:

• Item Code: KM878

Service Details:

MODEL KM 869 (19 functions 59 ranges)

Special Features

 
• Beep-Jack Audible & Visible Input Warning
• 41 Segment Analog Bar-graph
• Relative Zero Mode
• PC Interface Capability
• VFD-V & VFD-Hz readings
• Crest (Instantaneous Peak Hold) function
• T1-T2 differential Temperature readings.
• 500,000 counts stable DCV mode

Features :
• DC Voltage Basic Accuracy 0.02%
• AC; AC+DC True RMS Conversion AC. AC+DC Voltage Bandwidth upto 100kHz (V) & 10kHz (A)
• 5-4/5 Digit 500,000 counts large easy to read LCD Dual display with white Backlight
• Fast Measurements, 5/sec; Fully Auto-Ranging
• Record MAX, MIN & AVG. readings
• MAX & MIN readings & Data Hold Function
• dBm function with 20 selectable values
• High speed Capacitance measurement
• 1000V General Input Protection
• Logic & Line Level Frequency
• Logic Level Duty Cycle Readings & Diode Tester
• Fast Audible Continuity & Diode tester
• Auto Power Off


General Specifications :

• Sensing : AC, AC+DC True RMS
• Display :
  4-4/5 Digits 50,000 counts fast mode.
  Selectable stable mode
  5-4/5 Digits 500,000 counts for DC Voltage
  5 digits 99,999 counts for Hz
• Polarity : Automatic
• Update Rate :
  4-4/5 Digits fast mode : 5 per second nominal;
  5-4/5 Digits stable mode : 1.25 per second nominal;
  41 Segments Bar-graph : 60 per second max
• Sensing : AC, AC+DC True RMS
• Operating Temperature : 0°C to 45°C
• Relative Humidity : Max. 80% R.H. for Temperature up to 31°C decreasing linearly to 50% R.H. at 45°C
• Pollution Degree : 2
• Storage Temperature : -20°C to 60°C, <80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : nominal 0.15 x ( specified accuracy)/°C @ (0°C ~ 18°C or 28°C ~ 45°C), or otherwise specified
• Power Consumption : 6.5mA typical; 8mA for VFD ranges
• Low Battery : Below approx 7V
• APO Timing : Idle for 17 minutes
• APO Consumption : 70μA typical
• Power Supply : Single 9V battery
• Weight : Approx. 635gm with holster
• Dimension : 208(L) x 103(W) x 64.5(H) mm with holster.

Additional Information:

• Item Code: KM-869

Service Details:

MODEL KM 829 ( 26 functions 64 ranges)

Special Features :

• Beep-Jack Audible & Visible Input Warning
• Auto-Ranging
• Relative Zero Mode
• PC Interface Capability
• AutoCheck V-Ω ; Auto-Ranging
• Crest (Instantaneous Peak Hold)
• T1-T2 differential Temperature readings.
• Data Hold

 

Features :

• DC Voltage Basic Accuracy 0.08%
• AC; AC+DC True RMS Conversion Frequency
Bandwidth upto 20kHz (V) & 1kHz (A)
• 4 Digit 10,000 counts large easy to read Backlight LCD display
• Fast Measurements, 5/sec; Fully Auto-Ranging
• Record Max/Min readings, Auto Ranging
• NCV & Probe-Contact EF-Detection
• dBm function with 20 selectable values
• Lo-Z volts to drain Ghost Voltages (AutoCheck Feature)
• Logic & Line Level Frequency
• Logic Level Duty Cycle Readings & Diode Tester
• Fast Audible Continuity
• Auto Power Off

Specifications :

• Sensing : AC, AC+DC True RMS
• Display :
9999 Counts : ACV, DCV, Hz & nS
6000 Counts : mV, µA, mA, A, Ohm & Capacitance
• Update Rate :
Digital Display : 5 per second nominal;
41 Segments Bar-graph : 60 per second max
• Low Battery : Below approx 7V
• Operating Temperature : 0°C to 45°C
• Relative Humidity : Max. 80% R.H. for Temperature up to 31°C decreasing linearly to 50% R.H. at 45°C
• Pollution degree : 2
• Storage Temperature : -20°C to 60°C, <80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : nominal 0.15 x ( specified accuracy)/°C @ (0°C ~ 18°C or 28°C ~ 45°C), or otherwise specified
• Power Consumption : 5mA typical
• APO Timing : Idle for 30 minutes
• APO Consumption : 50 µA typical
• Power Supply : Single 9V battery
• Weight : Approx. 635gm with holster
• Dimension : 208(L) x 103(W) x 64.5(H) mm

Additional Information:

• Item Code: KM-829

Service Details:

MODEL KM 525 (17 Functions 69 Ranges)

KM 525 Stand Alone logging capability 43500 / 87000 points for dual / single display with selectable logged interval 0.05s, 0.1s, 1s, 2s, 3s, 4s, 5s, 10s, 15s, 30s, 60s, 120s, 180s, 300s, 600s

Special Features :

• Stand Alone Multi Parameter Logging
• Record Max/Min/ MAX-MIN readings
• Audible and visible input warning
• Auto -ranging relative zero mode
• AutoCheck V & Auto-ranging 50ms record
• T1-T2 Differntial temperature readings
• NCV & Probe contact EF Detection
• nS conductance
• Lo-Z volts to drain Ghost Voltages (Autocheck feature)
• Logic & Line level frequancy
• Logiv Level duty cycle readings

 

Features :

• DC Voltage basic accuracy 0.08%
• 4 digit 10,000 counts Backlight dual digital LCD display
• Low battery indication
• AC, AC+DC True RMS Conversion
• Frequancy bandwidth 20 kHz (V) & 1 kHz (A)
• Fast measurements, 5/sec
• Auto power off

General Specifications :
• Sensing : AC, AC+DC True RMS
• Display :
9999 Counts : ACV, DCV, Hz & nS
6000 Counts : mV, µA, mA, A, Ohm & Capacitance
• Update Rate : Digital Display : 5 per second nominal;
41 Segments Bar-graph : 60 per second max
• Low Battery : Below approx 7V
• Operating Temperature : 0 °C to 45 °C
• Relative Humidity : Maximum 80% R.H.
For Temperature up to 31 °C decreasing linearly to 50% R.H. at 45 °C
• Storage Temperature: -20 °C to 60 °C,<80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : nominal 0.15 x (specified accuracy)/
°C @ (0 °C ~ 18 °C or 28 °C ~ 45 °C), or otherwise specified
• Power Consumption : 5mA typical
• APO Timing : Idle for 30 minutes
• APO Consumption : 50μA typical
• Power Supply : Single 9V battery
• Dimension : 208(L) x 103(W) x 64.5(H) mm
• Weight : Approx. 635gm with holster

Additional Information:

• Item Code: KM-525

Service Details:

Model KM-711 (16 functions 56 ranges)

 

Special Features

• VFD-V & VFD-Hz in Dual Display
• 5msCREST-MAX capture mode (Peak Hold)
• Autoranging Relative -Zero mode
• Display Hold
• EF-Detection (NCV)
• Beep-Jack input warning
• Hz Line Level Frequency
• Hz Logic Level Frequency
• Diode Test
• Continuity Test

General Specification

• Sensing : Average sensing
• Display : 3-5/6 digits 6000 counts + 3 digits 999 counts dual LCD display
• Update Rate : 5 per second nominal
• Polarity : Automatic
• Low Battery : Below approx 2.4V
• Operating Temperature : 0 °C to 40 °C
• Relative Humidity : Maximum 80% R. H. For temperature upto 31 °C decreasing linearly to 50% Relative Humidity at 40 °C
• Altitude : Operating below 2000m
• Storage Temperature : -20 °C to 60 °C, < 80% R.H. (With battery removed)
• Temperature Coefficient : nominal 0.15 x (specified accuracy) / °C @ (0 °C--18 °C or 28 °C--40 °C), or otherwise specified
• Power supply : Standard 1.5V AAA Battery x 2.
• Power Consumption : 5.4mA typical
• APO Timing : Idle for 34 minutes
• APO Consumption : 10 μA typical
• Dimension : 186(L) x 87(W) x 35.5(H) mm ; 198(L) x 97(W) x 55.5(H) mm with Holster.
• Weight : Approx. 340 gms; 430gm with holster.

Additional Information:

• Item Code: KM-711

Service Details:

MODEL KM 233 (21 functions 39 ranges)

Special Features :

• VFD V & Hz Function
• BeepLit Continuity, Features Audible Beep & Visible Backlight Effects
• EF-Detection (NCV)
• Beep-Jack Input warning on mAmA/A terminals plug in
• Paper White Backlight Display
• Auto-ranging Relative Zero Mode
• Auto Power Off
• Low Battery Indication
• Auto-ranging MAX/MIN/AVG record
• Display Hold
• Diode & Continuity Test
• Rugged Fire retarded casing.

General Specifications :

• Sensing : TRUE RMS sensing
• Display : 3-5/6 digits 6000 counts LCD display
• Operating Temperature : -10°C to 45°C
• Storage Temperature: -20°C to 60°C, <80% R.H. With battery removed from meter.
• Update Rate : 5 per second nominal
• Relative Humidity : Maximum relative humidity 80% for temperature upto 31°C decreasing linearly to 50% relative humidity at 45 °C
• Altitude : Operating Below 2000m Pollution Degree : 2
• Temperature Coefficient : nominal 0.15 x (specified accuracy) /°C @ (0°C~18°C or 28°C~45°C), or otherwise specified.
• Low battery : Below approx. 2.5V
• Power Consumption : Typical 3.2 µ A
• APO Consumption : Typical 10 µ A
• APO Timing : Idle for 30 minutes
• Power Supply : 1.5V AAA battery x 2
• Dimension : 161(L) X 80(W) X 50(H) mm (with Holster)
• Weight : Approx. 334 gm ( with Holster)

Additional Information:

• Item Code: KM-233

Service Details:

MODEL KM 237R (29 functions 37 ranges)

Special Features :

• Auto V(LoZ), VFD V & Hz Function
• BeepLit Continuity, Features Audible Beep & Visible Backlight Effects
• Display Hold
• EF-Detection (NCV)
• Beep-Jack Input warning against improper A-terminal plug in
• Low Battery Indication
• Paper White Backlight Display
• Auto-ranging Relative Zero Mode
• Auto Power Off
• 3phase rotation-R(Regular-sensitivity mode) for supply systems(probe-contact)
• Auto-ranging MAX/MIN/AVG record
• 3phase rotation-M (Hi-sensitivity mode) for Motors (probe-contact)
• Diode & Continuity Test
• Rugged Fire retarded

General Specifications :

• Sensing : TRUE RMS AC conversion
• Display : 3-5/6 digits 6000 counts LCD display
• Temperature Coefficient : nominal 0.15 x (specified accuracy) /°C @ (-10°C~18°C or 28°C~45°C), or otherwise specified.
• Update Rate : 5 per second nominal
• Operating Temperature : -10°C to 45°C
• Update Rate : 5 per second nominal
• Relative Humidity : Maximum relative humidity 80% for temperature upto 31°C decreasing linearly to 50% relative humidity at 45 °C
• Altitude : Operating Below 2000m Pollution Degree : 2
• Storage Temperature: -20 °C to 60 °C, <80% R.H. With battery removed from meter.
• Temperature Coefficient : nominal 0.15 x (specified accuracy) /°C @ (0 °C~18 °C or 28 °C~45 °C), or otherwise specified.
• Low battery : Below approx. 2.5V
• Power Consumption : Typical 3.2mA
• APO Consumption : Typical 10 µ A
• APO Timing : Idle for 30 minutes
• Power Supply : 1.5V AAA battery x 2
• Dimension : 161(L) X 80(W) X 50(H) mm (with Holster)
• Weight : Approx. 334 gm ( with Holster)

Additional Information:

• Item Code: KM-237R

Service Details:

MODEL KM 839 (30 functions 72 ranges)

Special Features :
• Beep-Jack Audible & Visible Input Warning
• BeepLit Continuity Tester
• Relative Zero Mode
• Crest (Peak Hold) MAX/MIN Readings
• VFD Function
• 61 Segment Analog Bar-graph
• Display Hold
• Record MAX / MIN

 

Features :

• DC Voltage Basic Accuracy 0.09%
• Dual digital display AC + Hz readings
• Selectable 6,000 & 20,000 counts resolution.
• Nominal 5/sec Fast Measurements, Fully Auto-Ranging
• Paper-White Back-lighted LCD Display.
• High update record Max/Min readings
• Rugged fire retarded casing with battery & fuse access door.
• Replaceable protective holster with probe holders & tilt-stand.
• Diode & Continuity Test
• Auto Power Off

General Specifications :

• Sensing : AC True RMS
• Display : 3-5/6 digits 6000 counts & 4 Digit 20,000 counts
Max Large Backlight LCD Dual Display.
• Update Rate :
3-5/6 Digits : 5 per second nominal;
4-1/2 Digits : 5 per second nominal;
61 Segments Bar-graph : 40 per second max
• Operating Temperature : -10° C to 50° C
• Relative Humidity : Max. 90% R.H. for Temperature up to 28° C decreasing linearly to 50% R.H. at 50° C
• Pollution degree : 2
• IP Rating : IP40
• Storage Temperature : -20° C to 60° C, <80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : nominal 0.1 x ( specified accuracy)/° C @ (-10° C ~ 18° C or 28° C ~ 50° C), or otherwise specified
• Power Supply : Four Alkaline AA batteries.
• APO Timing : Idle for 20 minutes
• Power Consumption : 8mA typical for VFD ACV+Hz, 6.5 mA typical for other functions.
• Low Battery : Approx. 4.6V
• Weight : Approx. 635gm with holster
• Dimension : 208(L) x 103(W) x 64.5(H) mm with holster.

Additional Information:

• Item Code: KM-839

Service Details:

Model KM 859CF (14 functions 43 ranges)

Special Feautres :

• Record Max, MIN, MAX-MIN readings.
• Crest (Instantaneous Pead Hold) MAX, MIN, MAX-MIN readings.
• Relative zero mode.
• 500,000 counts high resolution stable reading mode. Backlighted display
• dBm readings.
• T1-T2 differential temperature reading s
• %4-20 mA loop current readings.
• High noise rejection filtered Line Level Frequency mode
• Line Level Frequency mode with 4 Trigger Levels.
• HBC Fuse Protection

Feautres :

• DC Voltage Basic Accuracy 0.02%
• Fully Autoranging
• Backlighted display.
• T1-T2 differential Temperature readings.
• Fast Data Measurement 5/sec
• Data Hold, Diode Test & Duty Cycle
• Audible & Visible input warning.
• Auto Power Off .

General Specifications

• Sensing : AC, AC + DC True RMS;
Frequency Bandwidth 100kHz (V) & 10kHz (A)
• Display :
4-4/5 digits 50,000 counts. Selectable stable mode
5-4/5 digits 500,000 counts for DC voltage,
6 digits 999,999 counts for Hz
• Polarity : Automatic
• Update Rate :
4-4/5 digits fast mode : 5 per second nominal;
5-4/5 digits stable mode : 1.25 per second nominal;
42 Segments Bar graph : 60 per second max.
• Low Battery : Below approx. 7V
• Operating Temperature : 0°C to 45°C
• Relative Humidity : Maximum relative humidity 80% R.H. For temperature upto 31°C decreasing linearly to 50% relative humidity at 45°C
• Pollution Degree : 2
• Storage Temperature : -20°C to 60°C, < 80% R.H. (With battery removed)
• Altitude : Operating below 2000m
• Temperature : Nominal 0.1 x (specified accuracy) / °C @ (0°C - 18°C or 28°C - 40°C), or otherwise specified.
• Power Supply : Single Alkaline 9V battery.
• Power Consumption : 5mA typical
• APO timing : Idle for 4.5 minutes
• APO Consumption : 20µA
• Dimension :
186(L) mm x 87(W) mm x 35.5(H) mm;
198(L) mm x 97(W) mm x 55(H) mm with Holster
• Weight : 390 gm, 500 gm with Holster

Additional Information:

• Item Code: KM-859CF

Service Details:

MODEL- KM 69 (14 functions 19 ranges) / KM 66 (6 functions 14 ranges)

Special Features:

• AC-Detection Shaker (KM 69)
• Bi-color LED Hazardous Live warning
(at > 70VDC / 33VAC) (KM 69)
• RCD Trip test. (KM 69)
• Segment Bar Graph (KM 69)
• Indicator Self-test
• Ergronomic design for easy grip in hand
• Overload-Alert warning, Non-Contact & Probe Contact EF-Detection.
• Type of protection IP65- water & dust resistant.

Features

• Automatic DCV, ACV, & Continuity Selection
• Overload Alert warning (1000V LED flashes when >1000V AC / DC
• RCD Leakage Load for 230V AC / 30mA RCD Circuit Breakers (KM 69)
• Audible Beeper Continuity & Visible LED indications
• High input impedance & Auto Hold
• Auto Power Off

General Specifications

• Sensing : Average sensing
• Display : 3 digits 1000 counts Backlight Display (KM 69)
• Update Rate : 5 per second nominal (KM 69)
• Operating Temperature: -10 ° C ~ 55 ° C
• Relative Humidity : 20% ~ 96%
• Altitude : Operating below 2000m
• Storage Temperature: -10 °C ~ 55 °C, 20% ~ 96% R.H. (With battery removed)
• Temperature Coefficient : Nominal 0.15 x (specified accuracy) /
°C @ (-10 °C ~ 18 °C or 28 °C ~ 55 °C), or otherwise specified.
• Pollution Degree : 2
• Low Battery : Below approx. 2.4V (KM 66); Below approx. 2.6V with shaker ON (KM 69)
• APO Timing : Idle for 15 seconds
• Power Consumption (typical)
3mA at Power-on ready;
25mA at 1000VAC full LED indication.
75mA at 1000VAC with shaker ON. (KM 69)
• APO Consumption (typical): 10 μA
• Power Supply : Standard 1.5V AAA battery x 2
• Dimension : 233(L) x 57(W) x 40(H)mm
• Weight : Approx. 220gm

Additional Information:

• Item Code: KM-69
• Packaging Details: Test lead pair, Battery and User manual.

Service Details:

General Specification

• Sensing : Average sensing
• Display : 3-3/4 digits 4000 counts large easy to read LCD display
• Update Rate : 3 per second nominal
• Polarity : Automatic
• Operating Temperature : 0 °C to 40 °C
• Relative Humidity : Maximum 80% R. H. For temperature upto 31 °C decreasing linearly to 50% Relative Humidity at 40 °C
• Altitude : Operating below 2000m
• Pollution degree : 2
• Storage Temperature : -20 °C to 60 °C, < 80% R.H. (With battery removed)
• Temperature Coefficient : nominal 0.15 x (specified accuracy) / °C @ (0 °C -18 °C or 28 °C-40 °C),
or otherwise specified
• Low Battery : Below approx 2.4V
• Power supply : Standard 1.5V AAA Battery x 2.
• Power Consumption : 3.2mA typical
• Sleep mode Timing : Idle for 30 minutes
• Sleep mode Consumption : 300 μ A typical
• Dimension : 186(L) x 87(W) x 35.5(H) mm ; 198(L) x 97(W) x 55 (H) mm with Holster.
• Weight : Approx. 296 gms; 396gm with holster.

Features

• Basic Accuracy : 0.5% DCV
• 25ms Max Hold
• Fully Autoranging
• Data Hold
• Relative Zero Mode
• Jack Beep audible warning against improper plug in
• Diode Test
• Fast audible Continuity Test
• Fire retarded case
• Splash proof construction.
• Auto power off

Additional Information:

• Item Code: KM-805S

Service Details:

Features

• Basic Accuracy : 0.5% DCV
• 25ms Max Hold
• Fully Autoranging
• Data Hold
• Relative Zero Mode
• Jack Beep audible warning against improper plug in
• Diode Test
• Fast audible Continuity Test
• Fire retarded case
• Splash proof construction.
• Auto power off

General Specification

• Sensing : True RMS sensing AC Voltage & Current.
• Display : 3-3/4 digits 4000 counts backlight large easy to read LCD display.
• Update Rate : 3 per second nominal
• Polarity : Automatic
• Operating Temperature : 0 °C to 40 °C
• Relative Humidity : Maximum 80% R. H. For temperature upto 31 °C decreasing linearly to
50% Relative Humidity at 40 °C
• Altitude : Operating below 2000m
• Pollution degree : 2
• Storage Temperature : -20 °C to 60 °C, < 80% R.H. (With battery removed)
• Temperature Coefficient : nominal 0.15 x (specified accuracy) / °C @ (0 °C--18 °C or 28 °C--40 °C),
or otherwise specified
• Low Battery : Below approx 2.4V
• Power supply : Standard 1.5V AAA Battery x 2.
• Power Consumption : 3.2mA typical
• Sleep mode Timing : Idle for 30 minutes
• Sleep mode Consumption : 360A typical
• Dimension : 186(L) x 87(W) x 35.5(H) mm ; 198(L) x 97(W) x 55(H) mm with Holster.
• Weight : Approx. 296 gms; 396gm with holster.

Additional Information:

• Item Code: KM-807S

Service Details:

Special Features

• Splash / Drop Proof
• 1000V AC / DC
• USB Interface
• Dual Display
• Backlit Display
• Intrinsically Safe
• Beep-JackAudible & Visible Input Warning
• Relative Zero Mode
• PC Interface Capability
• Data Hold
• Exrating : Ex ib I/IIC T6
• 1A / 1kV (IR10kA)for mA & mA (1000V HRC Fuse)
• 11A / 1kV (IR20kA) for A (1000V HRC Fuse)
• These meters comply to IEC SANS 600790:2000 & IEC SANS 60079-11:1999,
which is an electrical apparatus for explosive gas atmospheres. Part 0
(general requirements) & part 1 (intrinsic). The approved explosive protection
rating of this equipment is suitable for use in Zone 1 hazardous area.
Group I (coal mines) underground & Group II (surface).

Features

• DC Voltage Basic Accuracy 0.08%
• 4 Digit 10,000 counts large easy to read Backlight LCD display
• Fast Measurements, 5/sec; Fully Auto-Ranging
• Logic & Line Level Frequency
• Logic Level Duty Cycle Readings & Diode Tester
• Fast Audible Continuity
• Auto Power Off

General Specification

• Sensing : AC True RMS
• Display :
9999 Counts : ACV, DCV, Hz & nS
6000 Counts : mV, mA, mA, A, Ohm & Capacitance
• Update Rate :
Digital Display : 5 per second nominal;
41 Segments Bar-graph : 60 per second max
• Low Battery : Below approx 7V
• Operating Temperature : 0°C to 45°C
• Relative Humidity : Max. 80% R.H. for Temperature up to 31°C decreasing linearly to 50% R.H. at 45°C
• Pollution degree : 2
• Storage Temperature : -20°C to 60°C, <80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : nominal 0.15 x ( specified accuracy)/°C @ (0°C ~ 18°C or 28°C ~ 45°C), or otherwise specified
• Power Consumption : 5mA typical
• APO Timing : Idle for 30 minutes
• APO Consumption : 50mA typical
• Power Supply : Single 9V battery
• Weight : Approx. 635gm with holster
• Dimension : 208(L) x 103(W) x 64.5(H) mm with holster

Additional Information:

• Item Code: KM-822sEX

Service Details:

Special Features

 
• Extended >1000 ~ 1500V DC range suitable for solar
• Beep-JackAudible & Visible Input Warning
• 41 Segment Analog Bar-graph
• Relative Zero Mode
• PC Interface Capability
• VFD-V & VFD-Hz readings
• Crest (Instantaneous Peak Hold) function
• T1-T2 differential Temperature readings.
• 500,000 counts stable DCV mode
• %4-20mA Loop current readings.

Features

 
• DC Voltage Basic Accuracy 0.02%
• AC; AC+DC True RMS Conversion AC. AC+DC Voltage Bandwidth upto 100kHz (V) & 10kHz (A)
• 5-4/5 Digit 500,000 counts large easy to read LCD Dual display with white Backlight
• Fast Measurements, 5/sec; Fully Auto-Ranging
• Record MAX, MIN & AVG. Readings
• MAX & MIN readings & Data Hold Function
• dBm function with 20 selectable values
• High speed Capacitance measurement
• 1000V General Input Protection
• Logic & Line Level Frequency
• Logic Level Duty Cycle Readings & Diode Tester
• Fast Audible Continuity & Diode tester
• Auto Power Off

General Specification

   • Sensing : AC, AC+DC True RMS
• Display :
  4-4/5 Digits 50,000 counts fast mode.
  Selectable stable mode
  5-4/5 Digits 500,000 counts for DC Voltage &
  5 digits 99,999 counts for Hz
• Polarity : Automatic
• Update Rate :
  4-4/5 Digits fast mode : 5 per second nominal;
  5-4/5 Digits stable mode : 1.25 per second nominal;
  41 Segments Bar-graph : 60 per second max
• Operating Temperature : 0°C to 45°C
• Relative Humidity : Max. 80% R.H. for Temperature up to 31°C decreasing linearly to 50% R.H. at 45°C
• Pollution degree : 2
• Storage Temperature : -20°C to 60°C, <80% R.H. (with battery removed)
• Altitude : Operating below 2000m
• Temperature Coefficient : nominal 0.15 x ( specified accuracy)/°C @ (0°C ~ 18°C or 28°C ~ 45°C), or otherwise specified
• Power Consumption : 6.5mA typical; 8mA for VFD ranges
• Low Battery : Below approx 7V
• APO Timing : Idle for 17 minutes
• APO Consumption : 70A typical
• Power Supply : Single 9V battery
• Weight : Approx. 635gm with holster
• Dimension : 208(L) x 103(W) x 64.5(H) mm with holster.

Additional Information:

• Item Code: KM-870

Service Details:

MODEL - KM 255 / KM 257 (20 functions 50 ranges)

Special Features

• Autocheck V & Ω
• EF-Detection (NCV)
• Crest Mode (Peak Hold), Data Hold function
• 24 Segments Analog Bar-graph

 

Features:

• Backlight LCD Display
• Autoranging Relative Zero Mode
• Auto-ranging MAX/MIN record
• Wrong Input (test lead) warning detection (w. r. t. switch position)
• Auto Power Off
• Low Battery Indication
• PC interface (optional)
• Diode & Continuity Test

General Specifications :

• Sensing : Average Sensing (Model KM 255)
TRUE RMS (Model KM 257)
• Display : 3-5/6 digits 6000 counts LCD display
• Update Rate : Fast Data : 5 per second nominal 24 Segments Analog Bar-graph : 40/second
• Operating Temperature : 0 °C to 40 °C,at <70% R.H.
• Relative Humidity : Maximum relative humidity 80% for temperature upto 31°C decreasing linearly to
50% relative humidity at 40°C
• Storage Temperature: -20 °C to 60 °C, <80% R.H. With battery removed from meter.
• Altitude : 2000m
• Pollution Degree : 2
• Temperature Coefficient : nominal 0.15 x (specified accuracy)/°C @ (0°C~18°C or 28°C~40°C), or otherwise specified.
• Low battery : Below approx. 2.3V
• Power Consumption : 3.5mA
• APO Consumption : 10µA typical
• APO Timing : Idle for 34 minutes
• Power Supply : 1.5V AAA battery x 2
• Dimension : 161(L) X 80(W) X 50(H) mm
• Weight : Approx. 340 gm ( with Holster)

Additional Information:

• Item Code: KM255-KM257
• Packaging Details: Test leads pair, Holster, Carrying Case, Batteries installed, User's Manual and Banana plug K-Type Thermocouple